【www.0477edu.com--知识百科】

　　spring rate是回弹率，可能大家会觉得比较陌生。在了解spring rate意思的同时，还要懂得如何运用才行。那么现在就一起学习spring rate的英语知识吧。

　　spring rate的意思

　　回弹率

　　英 [spriŋ reit] 美 [sprɪŋ ret]

　　弹簧刚度;弹簧比率;大潮流速;弹簧刚性系数

　　参考例句：

　　1. For a 2 spring design (using 2 springs in parallel), each spring rate furnishes half of the rate or 22/2=11 lbs/in.

　　为2弹簧设计(使用2个弹簧在平行) ，每年春季率提供了一半的比率或22 / 2 = 11磅/在。

　　2. For a 2 spring design (using 2 springs in parallel), each spring rate furnishes half of the rate or 22/2=11 lbs/in.

　　为2弹簧设计(使用2个弹簧在平行) ，每年春季率提供了一半的比率或22 / 2 = 11磅/在。

　　3. This form of gasket has good performance of temperature, low leakage rate, high compression spring rate.

　　该形式的垫片具有耐温性能好、泄漏率低压 缩回弹率高的特点。

　　spring rate的网络释义

　　coiled spring coil spring disc spring disk spring spiral spring

　　盘簧;

　　spring rate

　　大潮流速; 弹簧刚度; 弹簧弹性[变化率; 弹簧率;

　　Front Spring Rate

　　前弹簧刚性;

　　variable rate spring

　　可变刚性系数弹簧; 变率弹簧;

　　dual-rate spring

　　可变刚性弹簧;

　　spring rate的双语例句

　　The specimen spring rate increases, thus making it necessary to increase the mass size enormously to provide valid test results.

　　试样的弹簧率也增加，因此必需大大地增加质量，以提供有效的试验结果。

　　This timing is affected by the relationship among poppet weight, spring rate, poppet travel distance, plunger speed, and plunger diameter.

　　定时受提升阀重量，弹簧振频，提升阀阀程，活塞速度以及活塞直径的影响。

　　Tolerance of spring opening and that of spring rate have been solved for motor vehicle leaf spring by applying theory of probability, and principal factors effecting these tolerances analysed.

　　应用概率理论求解了汽车钢板弹簧的弧高和刚度公差，并对影响这些公差的主要因素进行了分析。

　　In this paper, the laminated spring rate and stresses of leaves are calculated with the principle of complementary energy and obstacle iteration, taking the mounting conditions of the spring into consideration.

　　本文应用余能原理和障碍迭代法求解板簧的刚度和应力，计算中考虑了上压板长度，下支承长度以及骑马螺栓预紧力矩的影响。

　　It introduces the treatment principle and scheme, and does analysis calculation to the raft plate settlement and the spring rate of bottom soil, pile top settlement and the rigidity of pile body, foundation strength, which will supply reference to the similar projects.

　　介绍了基础的处理原则及处理方案，并对筏板的沉降及其底土的弹簧刚度、桩顶沉降及桩身刚度、地基强度进行了分析计算，以供类似工程参考。

　　At the same time it is also pointed out that to increase water jet speed and prolong its affective jet time mainly depend on the accretion of spring rate ( constant) of stiffness and the diminution of plunger cross section area respectively.

　　同时指出主要通过增大弹簧刚度(常数)和减小柱塞面积来提高喷水速度及增长有效喷水时间。

　　The reasonable selections of modifying coefficients of spring rate, stress and thickness of last leaf are given when the common curvature method is used.

　　本文还给出了用共同曲率法计算时，板簧刚度末片应力修正系数的合理取值以及为降低末片应力对其片厚的选择。

　　Analysis of the Changeable Spring Rate and Stress for the Ring-wave Spring Membrane Valve

　　环状波形阀簧的变刚性及应力分析

　　Then, by applying a method of successive searching approximation, all the forces loaded on each leaf, and the stresses, deflection curve and spring rate of each leaf can be worked out.

　　采用一种逐步搜索逼近法，可解出各个接触点的位置及作用力的大小，并进一步求得各叶片的应力分布、挠度曲线及弹簧刚度。

　　The rectangular expansion joints formulae of force, moment, equivalent axial movement and spring rate etc under load of axial, lateral and angular movements respectively are deduced. The spring rate formulae and moment formulae of rectangular expansion joints in EJMA standards are complemented and revised.

　　推导出了矩形膨胀节在轴向、横向、角向位移下产生的力、力矩、当量轴向位移以及刚度等公式，还对EJMA标准矩形膨胀节的刚度公式及力矩公式作了补充和修正。

　　A New Model for Determining the Stresses and Spring Rate of Multileaf Spring

　　求解多片钢板弹簧刚度与应力的新模型

　　Study on the Spring Rate of Polytetrafluoroethylene ( PTFE) Bellows

　　聚四氟乙烯波纹管刚度性能研究

　　It is pointed out that the changing spring rate of the ring-wave spring should be adapted to the working condition of the compressor valves and it is proved in application.

　　同时指出其变刚度特性非常适合于压缩机气阀的工况条件，并通过实际运用得到证实。

本文来源：http://www.0477edu.com/thread-36830-1-1.html